Please
follow these simple installation instructions when installing
Woolmen Batts:
Load
bags of batts into ceiling cavity to the left and right
of centre to enable a safe walking passage.
Lay batts from outer edge towards the centre of the
ceiling. This allows for the tearing to size comfortably
in the higher centre of the ceiling cavity.
Lift electrical wiring and place over batts where possible.
A clearance of 100mm should be left around exposed lights
and ceiling exhaust fans. Transformers should be placed
on joists. A clearance of 150mm should be left around
heater flues and chimneys.
Use a rake or stick to push the batts into hard to reach
spaces.
Always
dispose of bag wrapping toward ceiling access entry
for easy removal.
MEASURING FOR INSULATION
Woolmen
approved insulation is manufactured in standard widths,
which are designed to fit standard 600mm or 450mm ceiling
joist space centres.
Foiled
or plain Roofing Blanket and Acoustic Insulation is
available in the following options:
1.
1160 x 430mm Batts
2. 1160 x 580mm Batts
3. 1200 x 15000mm = 18m2 Rolls - foiled or plain blanket
4. 610 x 15000mm = 9.15m2 Rolls Acoustic Sound Blanket
(also 450mm option)
Use
your house plan to measure the square metre area of
the roof space or alternatively measure the length of
the exterior walls. Multiply the length of the house
by the width to give you an estimate of the area required.
With
this information please contact your local Woolmen Insulation
Representative for a formal quote relating to the 'R
Value' of your region and number of bags calculated
from the area of your building.
GENERAL
INFORMATION
If you have any questions that have not been answered
on the Web Site, please contact your local dealer for
further information.
|
